Transport Platform PH20 Material hoist H20

PH20 is a transport platform for people and materials regulated according to EN 12158 and the EN 16719. Available at 12 m/min (maximum permissible speed according to regulations), or multi-speed version 12/24/36 m/min with inverter (VFC) for mixed use transport platform/material hoist. Also available as material hoists (model H20) with automatic control to the landings. Available in a higher load capacity up to 2.5 tons, jumbo version with cabin 6 m long, Combi Version and twin cage version as well. The PH20 is made to be used in very intense working conditions, with great heights. The PH20 transport platform is equipped with modular system, interchangeable doors and possibility of third side big door, for maximum flexibility of use on site. Mast Section is the same of E20 and P45.

Transport Platform PH20 Material hoist H20

PH20 is a transport platform for people and materials regulated according to EN 12158 and the EN 16719. Available at 12 m/min (maximum permissible speed according to regulations), or multi-speed version 12/24/36 m/min with inverter (VFC) for mixed use transport platform/material hoist. Also available as material hoists (model H20) with automatic control to the landings. Available in a higher load capacity up to 2.5 tons, jumbo version with cabin 6 m long, Combi Version and twin cage version as well. The PH20 is made to be used in very intense working conditions, with great heights. The PH20 transport platform is equipped with modular system, interchangeable doors and possibility of third side big door, for maximum flexibility of use on site. Mast Section is the same of E20 and P45.

ADVANTAGES

Reasons to choose the PH20:
  • Highrise buildings
  • High payloads requiered
  • Big cabin with modular solution up to a length of 6 m (Jumbo Version).
  • Twin cage version also available.

MAIN FEATURES

Max. height

200 m
650 ft

Max. payload

2.000 - 2.500 kg
4.400 - 5.500 lb

Elevation speed

12 - 24 - 36 m/min
39 - 78 - 118 ft/min

Cabin dimensions

3.2 x 1.5 m
10.5 x 4.9 ft

Neck Compatibility

Engine power

MAXIMUM PAYLOAD

2.000 - 2.500 kg
4.400 - 5.500 lb

ELEVATION SPEED

12 - 24 - 36 m/min
39 - 78 - 118 ft/min

MAX HEIGHT

200 m
650 ft

CABIN DIMENSION

3.2 x 1.5 m
10.5 x 4.9 ft

CABIN DIMENSION CS JUMBO

5.7 x 1.5 m
18.7 x 4.9 ft

MAST COMPATIBILITY

P45 E20

SAFETY DEVICES

  • Base chassis with certified Rubber shock absorbers
  • Cable basket or cable trolley
  • Overload device (detection by load cells)
  • Ascend & descend limit switch
  • Mast ascend & descend emergency limit switch
  • Mast detection inductive limit switch
  • “Power cable anticut limit switch and anti‐tear device, for electric cable protection
  • (avoiding cable rupture) “
  • Electromechanical limit switch for cage landing door Inductive for cage boarding door
  • Ladder limit switch
  • Mast and anchorage trapdoor limit switch
  • Landing door mechanical limit switch: Do not open if the cabin is not at the floor
  • “Base enclosure access door electromechanical limit switch : Do not open if the cabin is
  • not at the ground”
  • Ground enclosure
  • Anti‐over‐run mechanical device
  • First class Self‐braking motor gear
  • External independent parachute emergency brake (CE certified)
  • Terminal Mast section with half rack to avoid overrun
  • Platform or roof hatch for erection with safety rails and safety limit switch
  • Visual Diagnostic of malfunctioning
  • Device for manual descent in case of power failure
  • Emergency light with battery or Led (CE) inside Cabin
  • All steel material of the supply, including the cabin, is hot galvanized
  • Magnetothermal protections and differential ampere switchetches
Find out about our products

Find out about our products

Request the technical sheet