TRANSPORT PLATFORM PH30 MATERIAL HOIST H30

PH30 is a transport platform for people and materials regulated according to EN 12158 and the EN 16719. Available at 12 m/min (maximum permissible speed according to regulations), or multi speed version 12/24/36 m/min with inverter (VFC) for mixed use transport platform/material hoist. Also available as material only hoists (model H30) with automatic control to the landings. Available also jumbo version with cabin 6 m long, and also Combi and twin cage version as well. The PH30 is made to be used in very intense working conditions, with great heights. The PH30 transport platform is equipped with modular system, interchangeable doors and possibility of third side big door, for maximum flexibility of use on site. Mast Section is the same of E30 and P50.
ph30

TRANSPORT PLATFORM PH30 MATERIAL HOIST H30

PH30 is a transport platform for people and materials regulated according to EN 12158 and the EN 16719. Available at 12 m/min (maximum permissible speed according to regulations), or multi speed version 12/24/36 m/min with inverter (VFC) for mixed use transport platform/material hoist. Also available as material only hoists (model H30) with automatic control to the landings. Available also jumbo version with cabin 6 m long, and also Combi and twin cage version as well. The PH30 is made to be used in very intense working conditions, with great heights. The PH30 transport platform is equipped with modular system, interchangeable doors and possibility of third side big door, for maximum flexibility of use on site. Mast Section is the same of E30 and P50.

ADVANTAGES

Reasons to choose the PH30 :
  • For works with large displacements and big heights.
  • Max Load capacity.
  • Big cabin with modular solution up to a length of 6 m (Jumbo Version).
  • Twin cage version also available.

MAIN FEATURES

Max. height

250 m 820 ft

Max. payload

3.000 Kg 6.600 lb

Elevation speed

12 - 24 - 36 m/min 39-78-118 ft/min

Cabin dimensions

3,2 m x 1,5 m

Neck Compatibility

Engine power

MAXIMUM PAYLOAD

3.000 Kg 6.600 lb

ELEVATION SPEED

12 - 24 - 36 m/min 39-78-118 ft/min

MAX HEIGHT

250 m 820 ft

CABIN DIMENSION

3,2 m x 1,5 m

CABIN DIMENSION CS JUMBO

5,7 m x 1,5 m

SAFETY DEVICES

  • Base chassis with certified Rubber shock absorbers 
  • Cable basket or cable trolley 
  • Overload device (detection by load cells)
  • Ascend & descend limit switch
  • Mast ascend & descend emergency limit switch
  • Mast detection inductive limit switch
  • Power cable anticut limit switch and anti‐tear device, for electric cable protection (avoiding cable rupture) 
  • Electromechanical limit switch for cage landing door Inductive for cage boarding door
  • Ladder limit switch 
  • Mast and anchorage trapdoor limit switch
  • Landing door mechanical limit switch: Do not open if the cabin is not at the floor
  • Base enclosure access door electromechanical limit switch : Do not open if the cabin is not at the ground
  • Ground enclosure
  • Anti‐over‐run mechanical device 
  • First class Self‐braking motor gear
  • External independent parachute  emergency brake (CE certified)
  • Terminal Mast section with half rack to avoid overrun 
  • Platform or roof hatch for erection with safety rails and safety limit switch
  • Visual Diagnostic of malfunctioning
  • Device for manual descent in case of power failure
  • Emergency light with battery or Led  (CE) inside Cabin
  • All steel material of the supply, including the cabin, is hot galvanized
  • Magnetothermal protections and differential ampere switchetche
Find out about our products

Find out about our products

Request the technical sheet