Construction Hoists E10

The SAEclimber E10 Passenger & Material hoist is designed according to EN 12159 standard. Available in 2 different motor configurations with the speeds 28 m/min or 36 m/min (with VFC). Payload is 1.000 Kg. The SAEclimber E10 construction hoist is made to be used even in intensive working conditions, in works in town or when a service elevator is needed. Mast Section is the same as the H10, PH10, PH5 and E05.

Construction Hoists E10

The SAEclimber E10 Passenger & Material hoist is designed according to EN 12159 standard. Available in 2 different motor configurations with the speeds 28 m/min or 36 m/min (with VFC). Payload is 1.000 Kg. The SAEclimber E10 construction hoist is made to be used even in intensive working conditions, in works in town or when a service elevator is needed. Mast Section is the same as the H10, PH10, PH5 and E05.

ADVANTAGES

Reasons for choosing the E10 model:
  • Ideal for city works or as a service elevator.
  • Simple and reliable.
  • Fast in assembly.
  • Economic but performing.

MAIN FEATURES

Altura máxima

150 m
390 lb

Máxima carga útil

1.000 kg
2.200 lb

Velocidad de elevación

28 - 40 m/min
0 - 78 ft/min

Dimensión cabina

2 x 1,3 x 2,1 m
5.2 x 4.9 x 6.9 ft

Compatibilidad de mástil

H05 PH05 H10 PH10

Potencia del motor

MAXIMUM PAYLOAD

1.000 kg
2.200 lb

ELEVATION SPEED

28 - 40 m/min
0 - 78 ft/min

MAX HEIGHT

150 m
390 lb

CABIN DIMENSION

2 x 1,3 x 2,1 m
5.2 x 4.9 x 6.9 ft

MAST COMPATIBILITY

H05 PH05 H10 PH10

SAFETY DEVICES

  • Base chassis with certified Rubber shock absorbers 
  • Cable basket or cable trolley 
  • Overload device (detection by load cells)
  • Ascend & descend limit switch
  • Mast ascend & descend emergency limit switch
  • Mast detection inductive limit switch
  • Power cable anticut limit switch and anti‐tear device, for electric cable protection (avoiding cable rupture) 
  • Electromechanical limit switch for cage landing door Inductive for cage boarding door
  • Ladder limit switch 
  • Mast and anchorage trapdoor limit switch
  • Landing door mechanical limit switch: Do not open if the cabin is not at the floor
  • Base enclosure access door electromechanical limit switch : Do not open if the cabin is not at the ground
  • Ground enclosure
  • Anti‐over‐run mechanical device 
  • First class Self‐braking motor gear
  • External independent parachute  emergency brake (CE certified)
  • Terminal Mast section with half rack to avoid overrun 
  • Platform or roof hatch for erection with safety rails and safety limit switch
  • Visual Diagnostic of malfunctioning
  • Device for manual descent in case of power failure
  • Emergency light with battery or Led  (CE) inside Cabin
  • All steel material of the supply, including the cabin, is hot galvanized
  • Magnetothermal protections and differential ampere switchetche

Find out about our products

Find out about our products

Request the technical sheet