Construction Hoist
E15

SAEclimber Construction hoist E15 is designed according to EN 12159. Available in 2 different motor configurations with the following speeds: 28 m/min ó 40 m/min (with VFC). Available with a payload of 1500 Kg or with 2000 Kg. The E15 is made to be used in intensive working conditions, and with high heights but with a competitive cost. The mast section compatible with our Goods hoist H15 and Transport Platform PH15 as well as our Mast Climbing Work Platform P40.

Images

Each image shows the quality, design, and technology that define our products, designed to offer safety, efficiency, and durability in every project.

Advantages

Ideal for Intensive work jobsites
Big Capacity 
Great working heights.
Large volume cabin.
Economical but very performant.

Safety Features

Base chassis with certified Rubber shock absorbers 
Cable basket or cable trolley 
Overload device (detection by load cells)
Ascend & descend limit switch
Mast ascend & descend emergency limit switch
Mast detection inductive limit switch
Power cable anticut limit switch and anti‐tear device, for electric cable protection (avoiding cable rupture) 
Electromechanical limit switch for cage landing door Inductive for cage boarding door
Ladder limit switch 
Mast and anchorage trapdoor limit switch
Landing door mechanical limit switch: Do not open if the cabin is not at the floor
Base enclosure access door electromechanical limit switch : Do not open if the cabin is not at the ground
Ground enclosure
Anti‐over‐run mechanical device 
First class Self‐braking motor gear
External independent parachute emergency brake (CE certified)
Terminal Mast section with half rack to avoid overrun 
Platform or roof hatch for erection with safety rails and safety limit switch
Visual Diagnostic of malfunctioning
Device for manual descent in case of power failure
Emergency light with battery or Led (CE) inside Cabin
All steel material of the supply, including the cabin, is hot galvanized
Magnetothermal protections and differential ampere switchetche

Available with “C” door.

Available with “Pole system” to speed up the installation of floor doors.

Available with Industry 4.0 remote control for faults and operation.

Technical Features

Height

150 m
(*) Other special heights are possible

Speed

0 - 40 m/min

Cabin dimensions

3,2 m x 1,5 m x 2,1 m (L X W X H)

Payload

1500 - 2000 kg