Construction Hoist
E20

The SAEclimber Construction Hoist E20 is conceived according to EN 12159 standard. Available in 2 different motor configurations with speeds of 40 m/min or 60 m/min, all with inverter. Available in single or twin cage versions with a payload of 2000 Kg per cage. The E20 is made to be used in very intense working conditions, with big heights and when many people and materials need to be lifted up. 
The mast section compatible with our Goods hoist H20 and Transport Platform PH20 as well as our Mast Climbing Work Platform P45.

Images

Each image shows the quality, design, and technology that define our products, designed to offer safety, efficiency, and durability in every project.

Advantages

For works with large displacements of people and material 
Big Capacity 
Great working heights
High speed hoist
Big cabin with modular solution up to a length of 4.5 m
Twin cage version available

Safety Features

Base chassis with certified Rubber shock absorbers 
Cable basket or cable trolley 
Overload device (detection by load cells)
Ascend & descend limit switch
Mast ascend & descend emergency limit switch
Mast detection inductive limit switch
Power cable anticut limit switch and anti‐tear device, for electric cable protection (avoiding cable rupture) 
Electromechanical limit switch for cage landing door Inductive for cage boarding door
Ladder limit switch 
Mast and anchorage trapdoor limit switch
Landing door mechanical limit switch: Do not open if the cabin is not at the floor
Base enclosure access door electromechanical limit switch : Do not open if the cabin is not at the ground
Ground enclosure
Anti‐over‐run mechanical device 
First class Self‐braking motor gear
External independent parachute emergency brake (CE certified)
Terminal Mast section with half rack to avoid overrun 
Platform or roof hatch for erection with safety rails and safety limit switch
Visual Diagnostic of malfunctioning
Device for manual descent in case of power failure
Emergency light with battery or Led (CE) inside Cabin
All steel material of the supply, including the cabin, is hot galvanized
Magnetothermal protections and differential ampere switchetche

Available with Industry 4.0 remote control for faults and operation

Technical Features

Height

200 m
(*) Greater heights available on request

Speed

0 - 40 (0-60) m/min

Cabin dimensions

3,2 m x 1,5 m x 2,1 m (L x W x H)
Version SW 4,4 m x 1,5 m x 2,1 m (L x W x H)


Payload

Single cabin: 2000 kg (2500 kg optional)
Twin cabin : 2000 kg + 2000 kg

Other Construction Hoists

Construction hoist E05 E05 Battery-operated

Construction hoist E10 E10 Battery-operated

Construction hoist E15

Construction hoist E20 - E20TWIN CAGE

Construction hoist E30 E30TWIN CAGE 
Construction hoist E40 E40TWIN CAGE